Machining accuracy: ±0.1mm/100mm
 
Maximum integral molding size: 3000*1200*850mm
 
What are the commonly used materials for CNC plastic processing and their properties
 
ABS: The density is 1.2, the toughness is good, it can be bonded, and it can be baked to 70-80 degrees after oil injection
 
PMMA: Density 1.3, relatively broken, good transparency, can be bonded, can be baked to about 65 degrees after spraying
 
PC: Density 1.2, can withstand high temperature of 120 degrees, can be bonded, can be sprayed, and the transparency is average
 
POM (Saigang): Density 2, high strength and toughness, can not be sprayed, can not be bonded, wear-resistant
 
PP: Density 1.1, high strength and good toughness, can be sprayed with oil, can not be bonded
 
Bakelite: Density 2, high strength and toughness, can not be sprayed, can not be bonded, can withstand high temperature of 250 degrees
 
Nylon: Density 1.2, high strength and good toughness, can not be sprayed, can not be bonded
 
475 plastic sheet: density 1.2, relatively soft, poor toughness, can withstand high temperature of 60-70 degrees
 
Plastic King (PTFE): Density 2.2, can not be glued, can not be sprayed with oil, can withstand high temperature of 250 degrees, relatively soft